51352 NACHI 2018 latest Bearing

Grease Speed Rating n1:6800 rpm; d:50.000 mm; Basic Dynamic Radial Load Rating C:40300 N; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:8000 rpm; Basic Static Radial Load Rating Co:40500 N; B:32.00 mm; D:80.0000 mm; Fillet Radius rb:0.30 mm;

Characteristic rolling element frequency, BSF:5.49 Hz; Max operating temperature, Tmax:110 °C; Characteristic outer ring frequency, BPF0:4.12 Hz; Radial clearance class:C3; Characteristic inner ring frequency, BPFI:5.88 Hz; Dynamic load, C:2.89 kN; D:24 mm; f0:14.5; ra max:0.3 mm; da max:15 mm;

Recommended tightening torque for set screw:5.5 Nm; Designation of open end cover:SCO206-30; d:30 mm; H2:41 mm; L:274 mm; s1:15 mm; S:8 mm; T min.:-20 °C; A:21 mm; Z:50.8 mm;

Grease Speed Rating n1:6800 rpm; d:50.000 mm; Basic Dynamic Radial Load Rating C:40300 N; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:8000 rpm; Basic Static Radial Load Rating Co:40500 N; B:32.00 mm; D:80.0000 mm; Fillet Radius rb:0.30 mm;

Z:14 mm; L1:20 mm; N:M8; C0:4.78 kN; H:30.2 mm; L:70 mm; E:9 mm; A1:19 mm; T max.:100 °C; Designation of housing:PA203N-;

Designation of bearing:EX213-40G2; A1:26 mm; N1:32 mm; Designation of housing:T213-; T min.:-20 °C; N2:70 mm; d1:86 mm; P:300 mm; H2:111 mm; L3:121 mm;

Recommended tightening torque for set screw:5.5 Nm; Designation of open end cover:SCO206-30; d:30 mm; H2:41 mm; L:274 mm; s1:15 mm; S:8 mm; T min.:-20 °C; A:21 mm; Z:50.8 mm;

s1:53.2 mm; B:61.8 mm; J:184 mm; G:M6x1; d:60 mm; C:52.5 kN; Designation of housing:P212-; Recommended tightening torque for set screw:22 Nm; N1:25 mm; H1:25 mm;

Fatigue limit load, Cu:28.3 kN; bearing material:Hardened Alloy Steel; ra max:2 mm; Inventory:0.0; dynamic load capacity:242000 N; Nlim (grease):3,900 rpm; rs min:2 mm; r1s min:2 mm; overall width:40 mm; cage material:Pressed Steel;

C0:11.2 kN; Weight:0.89 kg; J:117 mm; A1:14 mm; C:19.5 kN; G:M6x1; B:30 mm; e:18 mm; H:144 mm; L:80 mm;

d:12 mm; G:M6x1; Recommended tightening torque for set screw:5.5 Nm; S:17 mm; Dz:54 mm; d1:32.4 mm; A1:22 mm; T min.:-20 °C; Designation of housing:PA204N-; A:40 mm;

Shaft Diameter D:1 15/16 in; Dimension S1:1.2813 in; Dimension F:0.6250 in; Insert Bearing IB:ZMaRC; Basic Dynamic Radial Load Rating:7890 lbf; Dimension N:0.4063 in; Pin Dia BS:1/2; Dimension B:7.6250 in; Basic Static Radial Load Rating Co:5220 lbf; Distance J:2.7500 in;

N1:21.5 mm; d:34.92 mm; H1:16 mm; Z:22.5 mm; C:25.7 kN; B:42.9 mm; A1:30.5 mm; C0:15.2 kN; T max.:100 °C; L:166 mm;

d:12 mm; G:M6x1; Recommended tightening torque for set screw:5.5 Nm; S:17 mm; Dz:54 mm; d1:32.4 mm; A1:22 mm; T min.:-20 °C; Designation of housing:PA204N-; A:40 mm;

F:49.5 mm; b min:1.9 mm; E:71.5 mm; r0 max:0.6 mm; Snap ring reference:R80; Category:Bearings; d:40 mm; dc min:56 mm; Min operating temperature, Tmin:-20 °C; Weight / Kilogram:0.396;