THK sg 891/750 2018 lastest sliding block

S:24.6 mm; G:M6x1; T max.:100 °C; e:22 mm; Designation of housing:FL210N-; Dz:100 mm; H:197 mm; d:50 mm; s1:42.9 mm; A2:60.1 mm;

T min.:-20 °C; d:34.92 mm; SW:3.97 mm; G:R1/8"; A:32 mm; L3:40 mm; Designation of bearing:EX207-22G2; E:24 mm; L1:76 mm; C0:15.2 kN;

A2:40.4 mm; e:11 mm; N:14mm; H3:90; Weight:1.7 kg; Z:30.1 mm; d1:51.1 mm; S:9.5 mm; Recommended tightening torque for set screw:11.5 Nm; C0:15.2 kN;

T min.:-20 °C; d:34.92 mm; SW:3.97 mm; G:R1/8"; A:32 mm; L3:40 mm; Designation of bearing:EX207-22G2; E:24 mm; L1:76 mm; C0:15.2 kN;

S:24.6 mm; G:M6x1; T max.:100 °C; e:22 mm; Designation of housing:FL210N-; Dz:100 mm; H:197 mm; d:50 mm; s1:42.9 mm; A2:60.1 mm;

Recommended tightening torque for set screw:8 Nm; C0:23.2 kN; T min.:-20 °C; L1:65 mm; B:43.5 mm; d:49.21 mm; T max.:100 °C; Designation of bearing:US210-31G2; N1:25 mm; s1:21.75 mm;

A2:40.4 mm; e:11 mm; N:14mm; H3:90; Weight:1.7 kg; Z:30.1 mm; d1:51.1 mm; S:9.5 mm; Recommended tightening torque for set screw:11.5 Nm; C0:15.2 kN;

Recommended tightening torque for set screw:8 Nm; d1:44.1 mm; L:84 mm; C:19.5 kN; T max.:100 °C; J:90.5 mm; C0:11.2 kN; T min.:-40 °C; N:11mm; Designation of bearing:ES206-20G2T04;

T min.:-20 °C; d:34.92 mm; SW:3.97 mm; G:R1/8"; A:32 mm; L3:40 mm; Designation of bearing:EX207-22G2; E:24 mm; L1:76 mm; C0:15.2 kN;

A:32 mm; Weight:1.34 kg; s1:36.3 mm; C0:15.2 kN; SW:3.97 mm; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; Designation of housing:EHE207-; A5:18.8 mm; S:18.8 mm;

d:15 mm; s1:30.5 mm; T min.:-20 °C; N:M8; B1:43.5 mm; L1:18 mm; E:10 mm; H1:9 mm; H:33.3 mm; G:R1/8";

Characteristic inner ring frequency, BPFI:12.84 Hz; Fatigue limit load, Cu:0.88 kN; Mass:0.28 kg; ra max:1 mm; Characteristic outer ring frequency, BPF0:11.16 Hz; Characteristic rolling element frequency, BSF:14.28 Hz; Dynamic load, C:19 kN; Brand:NTN; Nlim (grease):5,400 rpm; Static load, C0:19.7 kN;

A2:40.4 mm; e:11 mm; N:14mm; H3:90; Weight:1.7 kg; Z:30.1 mm; d1:51.1 mm; S:9.5 mm; Recommended tightening torque for set screw:11.5 Nm; C0:15.2 kN;

A:32 mm; Weight:1.34 kg; s1:36.3 mm; C0:15.2 kN; SW:3.97 mm; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; Designation of housing:EHE207-; A5:18.8 mm; S:18.8 mm;

Characteristic inner ring frequency, BPFI:12.84 Hz; Fatigue limit load, Cu:0.88 kN; Mass:0.28 kg; ra max:1 mm; Characteristic outer ring frequency, BPF0:11.16 Hz; Characteristic rolling element frequency, BSF:14.28 Hz; Dynamic load, C:19 kN; Brand:NTN; Nlim (grease):5,400 rpm; Static load, C0:19.7 kN;